EcomBos

How to Keep One Creator Consistent Across an AI Ad Series

An ad series works because the audience starts to recognise someone. The same creator, the same bathroom, the same tone, five different reasons to buy. With AI, the hard part is not making one good clip; it is making the fourth clip look like it belongs with the first.

The short answer: decide the face once and reuse the exact same image every time. Make (or attach) one approved character photo before any episode is rendered, and pass that same image as the reference, or as the start frame, in every episode. Then describe the character the same way in every prompt, word for word: name, age range, look, outfit. Do the same for any location you come back to.

This guide shows the method we built into [EB-1](/agents/eb-1): a short series bible, a cast lock, episodes with different jobs, and a season quote before you spend anything. It also covers what EB-1 does not do for you yet, so you can plan around it.

Why do faces drift between AI clips?

Every generation starts fresh. If you describe a person only in words ("a woman in her late twenties with brown hair"), each render picks a different woman who fits the description. Over five episodes you get five cousins.

Three things cause most of the drift:

  • No visual anchor. Words alone leave too much open. An image closes the gap.
  • Changing descriptions. "Brown hair" in one prompt and "chestnut bob" in the next is a different instruction.
  • Changing conditions. A new outfit, harsh light, a side profile or a far-away shot all make it easier for the model to wander.

The fix for all three is the same: one reference image, one fixed description, and shots that keep the face readable.

What do you need before you start?

  • A product photo you own, sharp and well lit.
  • Rights to the face. Either an AI character you created, or a photo of a person who has agreed to be in your ads. Never a celebrity or a real person you do not have permission to use.
  • One premise. One sentence the whole series hangs on, for example: "A night-shift nurse finds five small ways to feel human again, one product moment each."
  • A rough budget. Each episode is priced separately, so it helps to know how many you want.

Step 1: Write a one-page series bible

Before any render, write down the rules every episode must follow. It takes ten minutes and prevents most continuity problems. EB-1 writes this with you for free in the chat; you only pay when something is rendered.

Part of the bibleWhat to write
PremiseOne line the whole series hangs on.
BuyerWho it is for, and the problem they have.
Product roleHow the product appears in every episode.
ToneThree words, e.g. warm, honest, quick.
World2–3 recurring locations, each with its light and time of day.
CastFor each person: name, age range, look, outfit, voice, one trait.
Visual rulesFormat, palette, camera style (e.g. handheld phone, eye level).
Hook formula and call to actionHow each episode opens, and how it ends.

Step 2: Lock the cast before any episode

This is the step that makes or breaks consistency. A recurring person needs one approved character photo before episode one is rendered.

If you already have one you have rights to, such as a character you made in [AI Influencers](/ai-influencers) or a creator photo, attach it in EB-1 with @ from your Assets. If not, make it first as a still image: a character sheet.

A good character sheet is boring on purpose:

  • front-facing, waist-up, looking at the camera;
  • plain, light backdrop and soft, even light;
  • wearing the series outfit;
  • neutral expression, hands relaxed.

Approve that image, then reuse that exact image in every episode: as a reference photo when the episode needs the person in a new scene, or as the start frame when the episode opens on them. Lock a recurring location the same way, with one location photo.

Step 3: Give each episode a different job

Consistency is about the cast and the world, not about repeating the same ad. Three to six episodes work well, and each one should do a different job. Each episode must also stand on its own, because a stranger might only ever see one of them.

EpisodeJobExample beat
1Hook and painThe problem in the creator's real day, in the first two seconds.
2DemoHands-on use, close enough to see the texture or the click.
3ProofThe after: how it looks, feels or performs, without invented numbers.
4ObjectionThe doubt a buyer has, answered on camera.
5OfferThe real offer, the product on screen, a clear call to action.

Step 4: Write a shot list for every episode

A shot list turns an idea into instructions a model can follow. Keep it to one table per episode, with seconds that add up to the episode length. For speech, budget about two and a half words per second.

#SecondsShotActionLineSound
10–2Medium close-up, eye level, handheldMaya holds the bottle up to the camera"Okay, the 6 a.m. face is real."Quiet bathroom room tone
22–7Close-up, slow push-inOne pump onto her fingertips—Pump click
37–12Medium shot, window lightShe smooths it in and smiles in the mirror"Ten seconds and I look awake."Soft music comes in
412–15Close-up of the product on the shelfBottle centred, label facing camera—Music settles

Step 5: Repeat the character description word for word

Every episode prompt should carry the same character block, copied, not rewritten. For example:

Maya, a woman in her early thirties with shoulder-length dark curly hair, light freckles and a navy oversized sweater. The same person as in the reference photo.

Do the same for the location ("a small white-tiled bathroom with a round mirror, morning light from a window on the left") and keep the same palette and camera style. Small wording changes are instructions to change something; avoid them.

Inside an episode, name the person once in full and then call them "the same woman" in each beat, so the model does not introduce a second person.

Step 6: Get the season quote, then make one episode at a time

Before anything is rendered, list every render (the character sheet first, then each episode) with its model, length and resolution, and add up the credits. EB-1 does this from the live price list in the chat. Models without a listed price show their exact price on the approval card.

Then go one step at a time. Approve the character sheet, check it, and only then approve episode one. Before each next episode, compare the last result to the bible: same face, same outfit, same light. If something drifted, fix that one thing in the next prompt rather than starting again.

What does EB-1 not do for you yet?

We would rather you plan with the real picture:

  • One approval per render. Each image or episode is proposed, priced and approved on its own. EB-1 does not render a whole season in the background.
  • No editing in the chat. EB-1 does not join episodes into one cut or burn in captions. Do that in your editor.
  • No direct link to AI Characters. EB-1 reads photos from the chat, your Assets and your store. Save a character portrait and attach it with @.

Which models keep a face best?

For talking creators, use a Seedance model; Seedance 2.5 handles longer clips (up to 30 seconds) and natural lip-sync best. Wan 3.0 accepts up to four reference photos or a start photo and runs up to 30 seconds with sound. Grok Imagine and Kling 4.0 Flash only use a start photo, so the character must be that start photo on those models. For the character sheet itself, Nano Banana Pro is the strongest image model for keeping faces consistent across complex scenes.

The consistency checklist

  • One approved character photo, reused in every episode.
  • One location photo per recurring place.
  • The same character and location wording in every prompt.
  • Faces readable: eye level, medium or close shots, steady light.
  • One outfit per character unless the story needs a change.
  • Each episode has its own job and works on its own.
  • Check every result against the bible before making the next.

Questions people also ask

Can I use a photo of a real person?

Only if you have their permission to use their likeness in ads. Never use a celebrity or public figure. If in doubt, create an original AI character instead.

Should the character be the start frame or a reference?

Use the start frame when the episode opens on that person. Use a reference when they appear in a new scene. Most models take one or the other in a single clip, not both.

How many episodes should a series have?

Three to six is a good range. Fewer than three is hard to call a series; more than six is easier to manage as a second season once you know what works.

Can EB-1 make the whole season at once?

No. EB-1 plans the whole season and quotes it, then proposes each render for you to approve one at a time.

The face changed in episode three. What now?

Check that the same character photo was attached and the description was copied word for word. Then remake only that episode with a closer, steadier shot of the face.

Does the outfit have to stay the same?

It helps a lot. Outfit is one of the strongest cues people use to recognise a character. Change it only when the story needs it, and describe the new outfit exactly.

Plan a series with EB-1